TuneECU

01Extreme69 · 10-05-2011, 11:49 PM

I know, I know, there is a ton of information about the TuneECU, but not much about the RC8 specifically. I am trying to get info. I jus got my cable, and the SAS removal kit. Has anyone used the TuneECU to turn of the SAS system? I also need to remove the charcoal canister valve sensor.

Any other RC8R specific info would be greatly appreciated.

briber2368 · 10-06-2011, 09:51 AM

you just go into map edit top right of the tune ecu screen then under devices double click SAI thats it

briber2368 · 10-06-2011, 09:53 AM

the o2 sensor is below it

fast4d · 10-06-2011, 10:39 AM

I got some strange error when I connected to my 2011.

haven't tried it since. I know my setup works because I used it on my superduke. I'll be disabling the SAS and O2 once I install the exhaust to see if it affects drivability.

briber2368 · 10-06-2011, 03:43 PM

what errors you getting

fast4d · 10-07-2011, 10:24 AM

something about invalid map.

I downloaded a newer version and will try again this weekend.

briber2368 · 10-07-2011, 11:40 AM

i had map not compatible with ecu (2010 arka map) should still connect and show standard 2011 map

01Extreme69 · 10-07-2011, 06:35 PM

I am getting the same "not compatible error" which trying to download the map for the akra on my 2011. I am now running with the EFI light. What are the benifits to turning off the 02 sensor? I still have them connected cause the FMF uses the stock head pipes.

Anybody know where we can get some good maps for the 2011's??

01Extreme69 · 10-07-2011, 10:59 PM

I got it!! I had to use the 2011 standard exhaust map. I havent been able to ride the bike other than around the block, but it seems to run ALOT better, and no more popping/backfiring while engine breaking. I cant find a Power Commander map, or a map for any exhaust.

briber2368 · 10-08-2011, 12:05 PM

you wont find one you will need to get your ecu flashed with 2011 arka map from your dealer, thats what i had to do because nobody out there has a map