97 250 sx firing problem - help please!

musicrow145 · 03-08-2010, 08:31 AM

Hello all,
I have a 97 250sx that will not fire. Does anyone out there know the ohm reading I should get on the stator and what voltage I should be getting out of the pickup coil? How about the ignition coil test readings? Is there anyone that can help me with these specs or let me know where I can find them on the web? Thank you very much! Jim

bajadog · 03-08-2010, 05:48 PM

Jim here is a good video.

Good luck.

http://www.youtube.com/watch?v=wbHSfHjMp28

musicrow145 · 03-09-2010, 08:29 AM

Thanks for the reply. I will check it out. I really appreciate it!

musicrow145 · 03-09-2010, 10:56 AM

ok.....I am getting 171 ohms on the stator coil and 16.8 ohms on the pickup coil.....also, when the motor is spun over, I am not getting any voltage at all from the pickup coil. I assume that is not good. Is there anyone that might be able to tell me if those ohm readings are good or not for a 96 250sx (sorry about the title of the thread "97 250sx".....it is actually a 96) thanks to anyone that might be able to help.