My Name is Mal

[mally]

Hi my name is Mal I have a 2000 LC4 supermoto. I have recently noticed water in the oil,Which is probably due to the fact that I was recently riding the bike with an inoperative fan switch I may have warped the Cyl head. I would appreciate any info on replacing head gasket and head skimming.Or has anyone got any other suggestions as to cause.

[bajadog]

Welcome Mal.

Most machine shops can put the head on a granite table to
see how out of flat it is. It's not hard to machine a little material
off of the head to get it flat again.

Could also just be a blown head gasket.

You are not getting oil in the coolant are you?

[mally]

My LC04 supermoto has water in the oil not water in the oil I was Riding with an inop Temp switch so suspect Cyl Gasket. Is it a big job to replace any tips