ktm 380 exc stator (1999-2000)

[Insane Engineering]

Hi,

Can anyone tell me if a 2000 KTM380 exc stator will fit a 1999 KTM380 exc, i cannot locate a reasonably priced stator for my 1999 380 but i can find one for $50 u.s. only it suits a 2000 and they cant tell me if it will fit a 1999 or not. Also can anyone help me to locate a flywheel to suit the 1999 as the magnets have fallen out of mine, or is it possible to have these re-stuck if so who would i be best to talk to (mechanic, auto-electrician etc)

Any help here is greatly appreciated as i have not even ridden this bike yet and im chomping at the bit to get out there.

Cheers
Jason.

[bajadog]

On the USA models using the Kokusan stator, the stator is the same
in 1999 as 2000.

If it uses this:

50339004100 STATOR KOKUSAN 2K-2 (USA)

If you have the SEM ignition you are out of luck.

[Insane Engineering]

:Thanks for your help agian Bajadog,

Nope its the SEM type , starting to get a little irritated with this bike, are you able to give me an idea of why the SEM type is different to the KOKUSAN type, if i need to change other parts to use the KOKUSAN instead thats not a drama because i have heard the SEM type are garbage anyway and i have to replace the flywheel to as the magnets have come out of mine, pretty sure this is the reason the stator is stuffed in the first place.......ahhhhh think i just figured it out, i would probably have to change the CDi unit wouldn't i???

Many thanks again for your help, the only solutions i have found so far are going to cost quite a bit of money.

Jason

[WoodsRiderParts]

You are right, I think you need to keep brands the same which would mean you would have to keep ALL components alike.

Luke