New SX150

[Jonwake36]

So i pulled the trigger and bought a new 150 YESTERDAY and today i went to go riding rode it for about a half an hour. The conditions were very sticky mud probly the worst thing to do to a brandnew bike but i had to ride it. During the ride i stalled it and it wouldnt start after that. I kicked it for about a half hour making sure obviously the gas was on, tried choke no choke etc. Still no love. Just got it home and cleaned and still wont start. Any one have any ideas what the problem could be?? Like i said it is brand new.

[Bergey]

Blantantly obvious, but there is fuel right?
Is this your first two stroke?
You did mix the oil with the gas?
If so what ratio?
Was the bike running fine right up until it died?

Some more background info on what you have tried would be helpful.

Have you looked to see if there is spark?
Have you taken the spark plug out?
What condition is it in?
Have you put a new spark plug in?
Did you try and start with throttle closed, wide open, just cracked?
My experience is that just crackesd is the best way to start a 2 stroke.
There is a very good chance the plug is fouled. Stock jetting can often be too rich, and makes it more likely.

Bergey

[Jonwake36]

Thanks for the input. I have tried all the things your mentioned with no luck. Back to the KTM shop i guess

[bajadog]

Isn't is still under some kind of warranty?