KTM Forums banner

Search results

1-20 of 164 Results
  1. Fuel filters-how often

    RC8/RC8R
    Note # Not that hard to T off the rubber hose from the tank to connector
  2. 2012 randomly running rough

    RC8/RC8R
    Dump the fuel, recheck your pump rebuild. The whirring sound happens when it's first pushing fuel through. Only way to tell if pump is bad is pressure test while revving.....
  3. SM setup on my 2018 350EXC-F

    Supermoto/Enduro
    good links, you seem to know a bit about it, tell us older guys what the point of the 16.5 and 17 options. Is there a practical reason youve discovered.
  4. SMC 625 Rim

    Supermoto/Enduro
    count spokes and then email companies.
  5. SM setup on my 2018 350EXC-F

    Supermoto/Enduro
    show me links of these top brands selling 16.5 and 17 please.
  6. KTM 2019 690 A2 help

    Supermoto/Enduro
    such a new bike, , very limited users getting their hands dirty. but just take the restriction away , what type of restriction device is it.
  7. How to remove rear brake caliper from '08 690 Enduro

    Supermoto/Enduro
    is there a small screw holding it on , look closer, pry off the brake hose from the bottom of the swing arm , its a hard press clip,no 10
  8. Rc8r Cam Tune & manual timing thread

    RC8/RC8R
    More pics
  9. Rc8r Cam Tune & manual timing thread

    RC8/RC8R
    Pics for food
  10. Rc8r Cam Tune & manual timing thread

    RC8/RC8R
    Another way to show the set up is rear head The exhaust cam is chained to the crank so thats the leading cam. How many teeth is the new cam setting from the normal cam timing mark on the rear exhaust, clockwise or anti clock wise teeth when crank is tDC?????? Next check Use the hole...
  11. Rc8r Cam Tune & manual timing thread

    RC8/RC8R
    i went looking and cant seem to find them for the sdr 1290 gt , although there are models that fit the 1290 and will work they are just not listed as fitting the 1290, Ktm twins would have them if they we as good or better than the dirt tricks. For example the manual tensioners for the rc8 will...
  12. Rc8r Cam Tune & manual timing thread

    RC8/RC8R
    most important thing for me was to change the tensioners and run ester blend oil in my 20km motor. the manual tensioners , ill post a thread in superdukes
  13. 2012 randomly running rough

    RC8/RC8R
    if its some contamination from the tank , there might be evidence under the throttle plates just where the injectors shoot fuel into the intake throats. I think its good to use but if the tank has a residue layer, then its making its way through the system.
  14. 1290 Cam Chain Tension Fail

    Super Duke
    I know if the motor is locked at tdc and both cams were off, when setting the cam timing , a rubber dowel pushed in the cct hole to take the slack while you check the cam marks would be nice, the manual cct just snug would be nice as you said.
  15. Rc8r Cam Tune & manual timing thread

    RC8/RC8R
    cam info 7 front intake 8 front exhaust 9 rear intake 10 rear exhaust 61236009000 fi 2008,09 RC8 , no timing adjust 61236010000 fe 2008,09 RC8, no timing adjust 61236109144 ri 2008,09 RC8, no timing adjust 61236110000 re 2008,09 RC8, no timing adjust 61236009100 fi 2010 rc8, no timing adjust...
  16. 2012 randomly running rough

    RC8/RC8R
    would have been good to run your normal fuel after the fuel pump mods. I would say to back track and fit the fuel line pressure tester for verification. Also attach pcV to your laptop, have you viewed that software before? did u use fuel treatment in the tank , that can be risky, it can remove...
  17. 1290 Cam Chain Tension Fail

    Super Duke
    thats the problem with the v2 , you cant run motor until all your gear is back on top and to fine tune take it all off. but i bet you will set it by feel while you have access to the chain but then its a new combo so you will probably fine tune again. ive done it hammy(y)
  18. Lost oil pump

    Offroad 4 strokes
    moved to 4 strokes
  19. 1290 Cam Chain Tension Fail

    Super Duke
    if i had a race bike i would do a manual cct
  20. 1290 Cam Chain Tension Fail

    Super Duke
    I was gonna do a manual tensioner but on the rc8 i need to remove lower air box for a proper setting. Im far from stupid , ive been using the manual tensioner on the 690 and over tightening is an issue as much as not enough.. thats why the dirt tricks was the choice, the finer ratchet means a...
1-20 of 164 Results
Top