KTM Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Two Strokes
    Inner clutch hub from 2004 300EXC will sub right in for NLA 2000-2002 hub BUT must also add one more of the 3mm thick hardened washers behind it to compensate for the 3mm shorter flange on the newer hub.All else can stay same including the long actuator rod. Run for over a year , even fitted...
  2. Two Strokes
    I have a 2002 300 exc I'm restoring. Thoughts on suspension . Send it out , do it myself, or don't bother. front end is very stiff. how we're they back in 2002. Thanks for any suggestions
  3. Two Strokes
    Hey everyone new to the group and the KTM scene does anyone know if other cylinders off of bikes that are different years fit the 2003 KTM 300EXC? I’ve read that they discontinued making the part but if I could find a cylinder my bike would be complete. Please and thank you.
  4. Offroad 4 strokes
    looking for a cylinder head for a 2001 exc 300 or a head for a similar bike that will fit.
  5. Two Strokes
    Hi Guys, my carby model 300 has died for the second time now, well into a ride. Has fuel in the bowl and in the fuel line. Have replaced plug on the trail both times to no avail. When it dies it feels just like it is running out of juice, nothing on the throttle but a bit of an idle. Only...
  6. TPI motors
    I bought a used 2018 300 TPI with about 100 hours on it, and it worked just fine for about two weeks up until last night. at about 2 in the morning i was going for a quick night ride and started the bike in my yard and started riding downhill in to the city and stopped in the intersection at the...
  7. Two Strokes
    Hi guy's, I'm currently riding a '04 300 EXC, my power valves are giving me issues. I have discovered that the control valves were quite loose and figured I would replace the oring which ktm spec 16x2 in size. But that didn't resolve the issue. I'm struggling to get new ones as they are...
1-7 of 7 Results
Top