KTM Forums banner

clutch problems

  1. US East
    I recently purchased my bike (2012, 250 XC) I putted around on it the day I bout it, messed with the suspension got it right for me. Welp today I finally took it out for its first run. I didn’t notice the clutch not fully disengaging until the end of my ride because as soon as I noticed it I...
  2. Offroad 4 strokes
    After bleeding the line multiple times with different methods. The bike stalls when put into gear. Could it be the clutch plates? I first noticed the problem after a long day of riding. Any advice appreciated. Cheers!
  3. Two Strokes
    So, when I let the clutch out slowly with half throttle, the clutch grabs a couple of times (and makes a kind of scratch like sound) before I fully engaged it. So the bike jumps forward about 2-3 times as I let the clutch out. Changed leaking master cylinder and bled the clutch cable, got better...
  4. Two Strokes
    Hi all I was other last week and my clutch packed in on me has pressure etc on my lever but bike done nothing when lever was pulled , got bike home ordered new clutch plates stripped bike and realised my inner hub and basket are notched up , have back bleeded my clutch as I do regular when I...
  5. Sportminicycles
    My ktm 65 sx clutch won’t engage. If you start the bike and shift with the clutch held, bike dies instantly. If you push into first and then beguin to use the clutch normally it seems to free up and work okay. When I look into the oil intake and pull the clutch there is movement between the...
Top