KTM Forums banner

The PITA fork dust seals

2781 Views 2 Replies 3 Participants Last post by  Lowrance
Trying to remove these is a real pain. I ended up putting some small nicks in the tube trying to get these things separated from the fork tube. Now I have some very small bare metal spots on that edge. Should I try to touch them up with something? Don't want any corrosion. These tubes are aluminum right? I'm sure this has happened to someone else on here.
See less See more
1 - 1 of 3 Posts
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.