[Mountain Goat]

I ordered 2 sets of CNC Flow sequentials for my '23. Hope they still work after the Akra is installed. (They should.)

 

[Mountain Goat]

Turn indicator Led Sequential FLOW

These supremely stylish and beautifully finished aluminum LED sequential indicators stand out for their race-style design that also exudes elegance.Kit...

www.cncracing.com

It's cheaper than it shows, because we don't have to pay VAT. And they are quick and efficient, I ordered day before yesterday and I can track through UPS that they'll be here on Monday.

It will be a bit of time before I can install them, because I have to get the Akra installed. I didn't buy the resistors to install them with the stock flash.

This is kind of a crapshoot that it'll work with a 2023. Hopefully they haven't changed anything in the ECU to keep it from working.

 

[Mountain Goat]

I used a micrometer to measure between the threads of the cnc blinkers, redrilled the hole and just twisted the new ones in.

Can you expand on that? The CNC indicators won't fit in the stock holes? How big was the bit you ended up using?

 

[Mountain Goat]

I chose to keep the old stems so made them work, but the CNC sequential led's fit just fine. sorry if i made you panic. View attachment 112676

How did you hook the CNCs up? The plugs are totally different from what's on the bike.
Here's the little CNC plugs:

Here's the bike plug:

Did you just snip the connectors and tie it all together? Or do I have the wrong model of Flows?

 

[Mountain Goat]

Rizoma makes "no-cut" adapters for this situation. They specify this one for the latest Gen 3 Wiring kit for front and rear Rizoma turn signals but I think if you are trying to achieve the "Akra map" fix, you may want to use the ones for the Gen 2

Good catch! It looks like this would be the one to get. And they say it's compatible with a Gen3:

Home - Rizoma

www.rizoma.com

Of course, in true Italian fashion, the connector measurements don't quite match. (The resistor one is first):